Blastrac 1-8DM

Blastrac’s 1-8DM is a highly portable, lightweight shot blasting system. Perfect for smaller jobs such as residential garage floors, pool decks, and small industrial floors, the 1-8DM runs on single phase common power. With manual travel speed and 8.75 inch blast pattern, this small blast machine is also ideal for balconies, areas around equipment and obstructions, and other tight spaces. This versatile small machine is frequently used as a complementary unit for larger jobs, and can also be used in preparation of concrete prior to wood floor installations or for applications such as overlays, paint, or coatings and for decorative uses. The Blastrac 1-8DM can prepare, strip, clean and profile in one easy step. There is no rinsing or drying time as with chemical acid etching, and the profile provides a better surface for coating adhesion. When connected to the Blastrac BDC-1216 or BDC-22 dust collector, it operates virtually dust-free. Cost-effective and environmentally friendly, this affordable shot blaster is a labor and time saving cleaning system for small to medium sized jobs.

FEATURES AND BENEFITS:

• Lightweight unit is easy to handle and transport • Shot pattern reducers available in 4”, 5”, and 6” • Simple design uses fewer moving parts, requires less maintenance • Can blast within 1½” of front wall and edges to within ¾” when side magnet seals are removed • Heavy-duty blast wheel drive system with 2 or 3 hp motor, belt drive, and long-life bearing unit • Operates virtually dust-free when connected to BDC-1216 or BDC-22

Blasting Width 8.75 in. (222mm) Travel Speed Manual Push Prod. Capacity Up to 350 sq.ft./hr (110V) | 450 sq.ft./hr (230V) Motor 2 hp (110V)| 3 hp (230V) Voltage 110V OR 230V Amperage 12A | 7.2A Power Cord 50 ft. (15m) Dust Hose Connection 2 in. (51mm) Dimensions L 41 in. x W 21 in. x H 41 in. (1016mm x 533mm x 1016mm) Weight Net 181 lbs (86kg) Dust Collector BDC-22

Technical Specifications

Blasting Width 8.75 in. (222mm) Travel Speed Manual Push Prod. Capacity Up to 350 sq.ft./hr (110V) | 450 sq.ft./hr (230V) Motor 2 hp (110V)| 3 hp (230V) Voltage 110V OR 230V Amperage 12A | 7.2A Power Cord 50 ft. (15m) Dust Hose Connection 2 in. (51mm) Dimensions L 41 in. x W 21 in. x H 41 in. (1016mm x 533mm x 1016mm) Weight Net 181 lbs (86kg) Dust Collector BDC-22

Blastrac 1-8DPS30

New improvements make the Blastrac 1-8DPS30 easier to operate and handle. This economical, self-propelled 8” shot blasting system now features drive controls on the steering handle. An EZ-adjust system for the control cage is another new feature that is operator friendly. Laser-cut components and utilization of improved manufacturing technologies along with a powder-coat finish helps assure quality construction and long life. A vacuum hose retainer and slide-out shot screen/tray with an integrated EZ-grip handle are further enhancements, as well as an improved yoke attachment for the front steering arm and self-propelled motor. When attached to the BDC-23 dust collector, the 1-8DPS30 operates virtually dust-free. The 1-8DPS30’s self-propelled operation improves productivity and promotes a more even and consistent blast pattern and surface profile. It consumes abrasive at less than 9 lb. per hr. and strips, cleans and profiles in one easy step to prepare concrete surfaces prior to application of coatings or overlays. Ideal for industrial floors, warehouses, commercial or residential garage floors, this shot blaster can prepare up to 450 to 600 sq. ft. per hour. The 1-8DPS30 is also perfect as a complementary unit for larger shot blasters.

Features & Benefits

Drive controls on adjustable steering arm – finger-tip control to operate EZ-adjust system for fine-tuning the control cage Vacuum hose containment bracket facilitates hose management EZ-grip handle integrated into shot screen tray Dust port now designed into shot hopper lid Labor and time-saving shot blasting process strips, cleans and profiles in one step − cost effective and friendly to the environment Operates virtually dust-free when connected to BDC-23 dust collector Great for decorative concrete applications when preparing for overlays and coatings

Technical Specifications

Blasting Width 8 in. (203mm) Production Capacity† Up to 600 sq.ft/hr on concrete (50 m2/hr) Blast Motor 4 hp (3 kw) Voltage 230V, 1ø Amperage 30A Power Cord 35 ft. (10.66m) Dust Hose Connection 3 in. (76mm) Dimensions L 51 in. x W 16 in. x H 47 in. (1295mm x 406mm x 1193mm) Weight Net 275 lbs (125kg) Dust Collector BDC-23 or BDC-24

Blastrac 1-8DPF40M

The Blastrac 1-8DPF40 shot blasting machine is perfect for small to medium-sized jobs. The machine is equipped with a drive motor and the maneuverability makes the 1-8DPF40 user friendly to operate and transport. This design blasts moving forward and is capable of reaching corners that other self propelled units cant reach.

FEATURES AND BENEFITS:

Drive controls on adjustable steering arm – finger-tip control to operate EZ-adjust system for fine-tuning the control cage Vacuum hose containment bracket facilitates hose management EZ-grip handle integrated into shot screen tray Dust port now designed into shot hopper lid Labor and time-saving shot blasting process strips, cleans and profiles in one step − cost effective and friendly to the environment Operates virtually dust-free when connected to BDC-23 dust collector Great for decorative concrete applications when preparing for overlays and coatings

Technical Specifications

Blasting Width 8 in. (203mm) Production Capacity Up to 600 sq.ft/hr Blast Motor 4 HP (3 kw) Voltage 230V, 1ø Power Cord 35 ft. (10.66m) Dust Hose Connection 3 in. (76mm) Dimensions L 51 in. x W 16 in. x H 47 in. (1295mm x 406mm x 1193mm) Weight Net 270 lbs Dust Collector BDC-23 or BDC-24

1-10DPS75

The Blastrac 1-10DPS75 has an AC inverted drive-motor with integrated brake. This improved feature helps maintain speed on ramps and inclines, making it the ideal choice for restoring skid resistance and traction in parking garages or on warehouse floors. This also improves your productivity as it generates a more even and consistent blast pattern and surface profile when prepping for coatings and overlays or when removing line stripings and markings. The 1-10DPS75 transports easily and has highly visible and manageable controls. All electrical components and panels are UL certified as part of Blastrac’s commitment to sound safety practices. Perfect for industrial floors, warehouses, factories roads and bridges, and supermarkets, the Blastrac 1-10DPS75 is an environmentally sound choice for any surface preparation contractor. Contact Customer Service at 800-256-3440 for details on lease-to-purchase financing.

Features & Benefits

Blasting Width 10 in. (254mm) Prod. Capacity† Up to 1290 sq.ft/hr (120m2/h) on concrete Blast Motor 10 hp (7.51kw) Voltage 230V, 3ø Amperage 26A Power Cord 50 ft. (15.24m) Dust Hose Connection 3 in. (75mm) Dimensions L 63 in. x W 17 in. x H 40 in. (1590mm x 425mm x 1016mm) Weight Net 465 lb. (211kg) Dust Collector BDC-33 or BDC-44

Technical Specifications

Blasting Width 10 in. (254mm) Prod. Capacity† Up to 1290 sq.ft/hr (120m2/h) on concrete Blast Motor 10 hp (7.51kw) Voltage 230V, 3ø Amperage 26A Power Cord 50 ft. (15.24m) Dust Hose Connection 3 in. (75mm) Dimensions L 63 in. x W 17 in. x H 40 in. (1590mm x 425mm x 1016mm) Weight Net 465 lb. (211kg) Dust Collector BDC-33 or BDC-44

Blastrac 1-10DSGI

Ideal for medium and large sized jobs the 1-10DSGI is a versatile, self-propelled 10” shot blasting system. The AC inverted drive-motor for self-propelled operation features an integrated brake which helps maintain speed on ramps and inclines. This improves productivity and promotes a more even and consistent blast pattern and surface profile. When attached to the BDC-66 dust collector, it operates virtually dust-free. Easily transportable, the 1-10DSGI has highly visible and manageable controls, and operates on 230 or 460V with its auto-sensing voltage control 15 hp UL listed motor. All electrical components and panels are UL certified as part of the Blastrac commitment to safety protocol. Perfect for industrial floors, warehouses, road and airport maintenance, and parking garages, this shot blaster is an environmentally sound choice for your surface preparation arsenal. Contact Customer Service at 800-256-3440 for details on lease-to-purchase financing.

FEATURES AND BENEFITS:

Easily maneuverable, self-propelled machine–forward and reverse AC inverted drive-motor with integrated brake for even, down-slope operation on ramps and inclines Highly versatile and appropriate for medium to large job sites Excellent for industrial floor prep, road and airport maintenance, asphalt blasting, decontamination, and much more Labor and time-saving shot blasting process strips, cleans and profiles in one step−cost effective and friendly to the environment Operates virtually dust-free when connected to the Blastrac BDC-66 dust collector−healthier for the operator and other workforce

Technical Specifications

Blasting Width 10 in. (254mm) Production Capacity Up to 1937 sq.ft/hr (180m2/h) on concrete Blast Motor 15 hp (11kw) Voltage Dual Voltage 460/230V, 3ø Amperage 21 (460V) 39A (230V) Power Cord 60 ft. (18.28m) Dust Hose Connection 5 in. (127mm) Dimensions L 64 in. x W 18 in. x H 43 in. (1625mm x 457mm x 1100mm) Weight Net 794 lb. (360kg) Dust Collector BDC-66

1-15DSGI

Ideal for medium to larger sized jobs, the Blastrac® 1-15DSGI is a versatile, self-propelled 15 inch shot blasting system. 1-15DSGI strips, cleans and profiles concrete and asphalt in one easy step. Whether improving traction and skid resistance or prepping for coatings and overlays, this unit serves the purpose well with its friendly-to-the-environment process. The AC inverted drive-motor for self-propelled operation features an integrated brake which helps maintain speed on ramps and inclines. This improves productivity and promotes a more even and consistent blast pattern and surface profile. Attached to the BDC-66 dust collectors, it operates virtually dust-free containing debris and contaminants for a safer work environment and improved productivity. A slide-out screen in the shot hopper facilitates the removal of large debris. The 1-15DSGI can prepare up to 2690 sq. ft. per hour† consuming abrasive at about 1.6 lb. per 100 sq. ft. or 42 lb. per hr. The quick-lift rear caster assembly makes this 1093 lb. unit easily transportable. It has highly visible and manageable controls with the drive control on the steering handle. The 1-15DSGI operates on 230 or 460V and features an auto-sensing voltage control 20 hp motor. All electrical components and panels are UL certified, part of Blastrac’s commitment to safety protocol. Perfect for industrial floors, warehouses, road and airport maintenance, and parking garages, this shot blaster is an environmentally sound choice for high productivity in surface preparation.

Features & Benefits

Easily maneuverable, self-propelled machine–forward and reverse Quick-lift rear caster assembly for easier transporting AC inverted drive-motor with integrated brake for even, down-slope operation on ramps and inclines Highly versatile and appropriate for medium to large job sites Excellent for industrial floor prep, road and airport maintenance, asphalt blasting, decontamination, and much more Labor and time-saving shot blasting process strips, cleans and profiles in one step−cost effective and friendly to the environment Operates virtually dust-free when connected to the Blastrac BDC-66 dust collector− healthier for the operator and other workforce

Technical Specifications

Blasting Width 15 in. (381mm) Production Capacity Up to 2690 sq.ft./hr (250m2/h) on concrete Blast Motor 20 hp (15kw) Voltage Dual Voltage 460/230V, 3ø Amperage 27 (460V) 52A (230V) Power Cord 60 ft. (18.28m) Dust Hose Connection 6 in. (117mm) Dimensions L 71 in. x W 23 in. x H 47 in. (1803mm x 584mm x 1193mm) Weight Net 1093 lb. (496kg) Dust Collector BDC-66

Blastrac 2-20DTMKII

The Blastrac® 2-20DTMKII is a powerful self-propelled 20” shot blasting system, ideal for medium to larger sized jobs. Whether improving traction and skid resistance or prepping for coatings and overlays, the versatile 2-20DTMKII strips, cleans and profiles concrete and asphalt, or horizontal steel surfaces in one easy step. The AC inverted drive-motor for self-propelled operation features an integrated brake which helps maintain speed on ramps and inclines. This improves productivity and promotes a more even and consistent blast pattern and surface profile. Attached to the BDC-99 dust collector, it operates virtually dust-free. A slide-out screen in the shot hopper facilitates the removal of large debris. The 2-20DTMKII can prepare up to 4850 sq. ft. per hour† consuming abrasive at about 1.6 lb. per 108 sq. ft. or 78 lb. per hr. The quick-lift rear caster assembly makes this 1268 lb. unit easily transportable. It has highly visible and manageable controls with the drive control on the steering handle. The 2-20DTMKII operates on 460V, three-phase, and all electrical components and panels are UL certified, part of the Blastrac commitment to safety protocol. Perfect for industrial floors, warehouses, road and airport maintenance, and parking garages, this shot blaster is an environmentally sound choice for high productivity in surface preparation.

Features & Benefits

Easily maneuverable, self-propelled machine–forward and reverse AC inverted drive-motor with integrated brake for even, down-slope operation on ramps and inclines Quick-lift rear caster assembly for easier transporting, loading and off-loading Highly versatile and appropriate for medium to large job sites Excellent for industrial floor prep, road and airport maintenance, ship decks, decontamination, and more Labor and time-saving shot blasting process strips, cleans and profiles in one step−cost effective and friendly to the environment Operates virtually dust-free when connected to the Blastrac BDC-99 dust collector−healthier for the operator and coworkers

Technical Specifications

Blasting Width 20 in. (550mm) Production Capacity† Up to 4850 sq.ft/hr (450m2/h) on concrete Blast Motor Twin 15 hp (11kw) Voltage 460V, 3ø Amperage 44A Power Cord 65 ft. (20m) Dust Hose Connection 6 in. (152mm) Dimensions L 77 in. x W 28 in. x H 55 in. (1956mm x 711mm x 1397mm) Weight Net 1268 lb. (575kg) Dust Collector BDC-99

2-30DSMKIV

The Blastrac 2-30DSMKIV is a powerhouse machine designed for the big jobs that require high productivity. The drive system with integrated brake is designed for ramps and inclines, making the 2-30DSMKIV ideal for parking decks. A high-speed travel switch on the 2-30DSMKIV helps ensure uniform surface preparation by allowing for quick repositioning after each pass, without resetting the travel speed. Use this Blastrac Super system for industrial plant and warehouse floors, parking garages, ship decks, highway or bridge work, airport runways and other large jobs.

Features & Benefits

30 inch cleaning path Recommended for light to medium removal Excellent for warehouse floors or thin mil coating applications High-speed travel switch helps ensure uniform profiling by allowing for quick repositioning for successive passes, without resetting travel speed Base elevates the machine for easier transport Operates virtually dust free when connected to BDC-99 dust collector Prepares up to 9,000 sq.ft/hr. 20 hp blast motor, 2 motors

Technical Specifications

Part Number 2-30DMKIV Cleaning Path 30 in. (762mm) Production Capacity† 9,000 sq.ft/hr. Blast Motor 20 hp, 2 motors Voltage 460V, 3ø Amperage 59.8 A Dimensions L 75 in. x W 39 in. x 48 H in. Weight 1,575 lb. (714kg) Dust Collector BDC-99

Blastrac 2-48DS Global (Concrete / Asphalt / Steel)

Blastrac®’s largest walk-behind shot blaster to date, ideal for the large jobsite, the Blastrac® 2-48DS Global is a highly versatile machine four foot wide shot blasting system. The 2-48DS Global can be used for floor preparation, renovation, maintenance and decorative purposes. Ergonomic design and user friendly control panel makes for easy handling. Closed circuit which is dust free when connected to the 2-48DC Blastrac dust collectors. For improved dust extraction there are two six inch dust hose connections. An extremely powerful and productive machine that can tackle the largest of preperation, renovation and maintenance jobs. This shot blaster is an environmentally sound choice for high productivity in surface preparation. The 2-48DS can prepare up to 20,750 sq.ft. per hour on concrete. Double rear wheels and idler system with gas spring cylinder system helps to make machine effecient for all floor types. All electrical components and panels are UL certified, part of Blastrac’s commitment to safety protocol.

Features & Benefits

Special designed blast housing Double rear wheels and idler system with gas spring cylinder system Highly versatile and appropriate for medium to large job sites Powerful machine equipped with two blast motors Very efficient on all types of floors Special separator flow adjustment system Ergonomic design and user friendly control panel Operates virually dist free when connected to the 2-48DC dust collector

Blasting Width 4 ft. (1220mm) Production Capacity† Up to 20,750 sq.ft/hr (2000m2/h) on concrete (based on using 2-48DC) Blast Motor (2) 35 hp Voltage 460V, 3ø, 60 Hz Amperage 96A Dust Hose Connection (2) 6 in. (150mm) Dimensions L 95 in. x W 56 in. x H 57 in. (2420mm x 1433mm x 1450mm) Weight Net 2976 lb. (1350kg) Dust Collector 2-48DC

350E (Steel)

The Blastrac 350E Global steel shotblaster is a machine suited for small to medium steel blasting projects. This machine is capable of preparing steel surfaces such as petrochemical or water storage tank floors and roofs, ship decks, barges and other marine vessels, hatch covers, bridge decks and offshore drilling platforms. The Blastrac 350E Global utilizes a center fed blast wheel design to propel steel shot, hardened steel grit or a mixture of both, to the surface allowing the operator to achieve a wide range of surface profiles as specified.

Key Points

Can fit through a 19” access opening making it ideal for interior tank preparation or other confined space Independent drive for each rear wheel Fast and efficient removal of coatings, paint, rust and more

Technical Specifications

Blasting Path 13.75 in Motor 15HP | 480V, 3 phase Dimensions l 53 in x w 26 in x h 43 IN Weight 827 LB Production 410 sq.ft./HR.

500E (Steel)

The Blastrac 500E Global steel shotblaster is a machine suited for medium to large steel blasting projects. This machine is capable of preparing steel surfaces such as petrochemical or water storage tank floors and roofs, ship decks, barges and other marine vessels, hatch covers, bridge decks and offshore drilling platforms. The Blastrac 500E Global utilizes a center fed blast wheel design to propel steel shot, hardened steel grit or a mixture of both, to the surface allowing the operator to achieve a wide range of surface profiles as specified.

Key Points

Modular assembly can pass through 24” wide access opening Independent drive for each rear wheel

Blasting Path 19.5 in Motor 35HP | 480V, 50-60Hz | 63A Dimensions L 61.5 in x W 29.5 in x H 65 in Weight 1433 lb Production 800 sq ft / hr

25 inch Magnet Sweeper

Blastrac Magnetic Products Walk Behind Magnetic Sweepers are built for the professional contractor. Magnets are essential tools for cleaning the work area of metal debris prior to surface preparation, preventing damage to equipment. They are also helpful for quick job site cleanup after shot blasting, and for loading and unloading shot from the machine hopper. Built from heavy duty aluminum construction, this magnet sweeper will never rust. Keep worksites, shops, warehouses, and jobsites free and safe from metallic debris. The double layer of permanently charged magnets provides maximum pick-up power while the ergonomic debris release handle prevents the need to bend over to release metal debris.

Key Points

24" Wide cleaning path Adjustable height from 1.5" to 3.5" from surface Double layer of permanently charged magnets Ergonomic debris release handle Heavy duty aluminum construction Maximum pick up power Rust free